 
|
Information
on artwork
services and requirements.
Upload
print ready artwork
This is
where YOU supply us with the artwork to print from. We will print
your artwork as it is supplied.
It needs
to be in either an Adobe PDF(Portable Document Format) or an EPS (Encapsulated
Postscript).
It is
very important that you supply your artwork at the right size with a
colour format of CYMK.
We
recommend that artwork has a resolution of at least 300dpi (dots per
inch).
Printing at below 300dpi may result in poor printing
quality.
ALL paper
and card items (including flyers, posters, business stationary etc)
should be supplied with a 2mm all round bleed.
ALL vinyl
,banners, stickers, canvas, boards, magnetic, and all other types of
signage should be supplied WITHOUT a bleed
Artwork check service
This is
where YOU supply the artwork to the specifications above.
The
Printing Box will check once that the document is to the correct size,
that the colour format is CYMK, that it includs the 2mm bleed, and
that the resolution is above 300dpi.
If we
find any of these points to be wrong we will inform you. You may
then alter your artwork before resending to us for printing.
Please
note that is is not a design or alteration service ~ is it a check and
advise service for the items stated above.
Complete design service
This is
where we take your idea's and create the artwork for you.
We can use any logo's, images or specified fonts that you have or
already use.
For further information on our design
service please see our design service page.
`
|
